We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821401170
Description
Operating mode | hold: spring force, release: compressed air |
Function type | Hold with clamping jaws |
suitable piston rod diameter | 25 mm |
Piston diameter | 100 mm |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821401170, communicate with FAMAGA, the world's principle company of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each orderer. We understand everyone, who engaged with us - thus, our regular purchasers bring in the most attractive purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Nicaragua, Lesotho, Cuba, Liberia, Papua New Guinea, Egypt, Costa Rica, Japan, Romania, Indonesia, Belarus, Fiji, Iraq, Niger, Swaziland, Hungary, Netherlands, Eritrea, Mozambique, Argentina, Benin, Brazil, Bolivia, Panama, Iceland, Zimbabwe, Bosnia and Herzegovina, Samoa, Togo, Philippines, Georgia, Laos, El Salvador, Algeria, Vietnam, Ghana, Ireland, Guatemala. A well-built logistics network and a partnership network cheer us to send our goods anywhere in the world immediately without disreputing product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as stay in control.
To request or make a request, phone us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Function | Hold with clamping jaws |
Release pressure | 4 ... 8 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Weight | See table |
Warning: The holding unit may not be used for the following applications:1) for dynamic holding2) in or as safety equipment Holding unit may only be unlocked when turned off. Make sure that the load direction does not change during a holding interval. A change in the direction of force, as well as external forces such as impacts, strong vibrations, or torsional forces, will briefly release the piston rod and may destroy the HU1 holding unit. When clamped, there must be no residual pressure on the holding unit ( 0 bar ). Note:The minimum control pressure is >= the working pressure of the cylinder! |
Material |
---|
Housing | Aluminum, black anodized |