We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000251
Description
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R402000251, communicate with FAMAGA, the world's chief producer of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of products and individual attention to each consumer. We appreciate everyone, who conspired with us - therefore, our regular consumers get the most acceptable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Portugal, Guinea, Russia, Grenada, Czech Republic, Myanmar, Colombia, Ecuador, Turkmenistan, New Zealand, Paraguay, Saudi Arabia, Chad, Mozambique, Uganda, Mexico, Azerbaijan, Liechtenstein, Montenegro, Burkina Faso, Hungary, Poland, Iceland, Kiribati, Botswana, Burundi, Antigua and Barbuda, Niger, Mongolia, Tanzania, Denmark, United States, North Korea, Tunisia, Armenia, Nepal, Rwanda, Kyrgyzstan. A well-elaborated logistics chains and a partnership network assist us to conduct our items anywhere in the world as soon as possible without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 65 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |