We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480643781
Description
ball rail guide | With integrated “Medium Performance” ball rail system |
double piston | with double piston |
Functional principle | double-acting |
Cushioning | Elastic with metal end stop |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480643781, catch up with FAMAGA, the world's the best supplier of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We esteem everyone, who collaborated with us - hence, our regular buyers accept the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Monaco, New Zealand, China, Singapore, Swaziland, Indonesia, Grenada, Bahamas, Cuba, Burma, Kuwait, Croatia, Cyprus, Chad, Colombia, Yemen, Macedonia, Angola, Belarus, Switzerland, Mauritania, East Timor, United States, Luxembourg, Mozambique, Albania, Montenegro, Egypt, Dominica, Mexico, Sierra Leone, Madagascar, Burkina Faso, Paraguay, Serbia, El Salvador, Greece, Malaysia, Qatar, Botswana, The Gambia, Sweden, Costa Rica. A well-elaborated logistics series and a partnership network allow us to send our goods anywhere in the world immediately without discrediting product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Repetitive precision | 0,02 mm |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Repetitive precision after 100 consecutive strokes: 0,02 mm Base with air connections at the back and sides Intermediate strokes can be configured. Scope of delivery: incl. centering rings R1 = stroke setting range for forward stroke R2 = stroke setting range for return stroke Ø 8 has a different reference plane. |
Material |
---|
Housing | Aluminum, anodized |
Piston rod | Stainless steel |
Front plate | Aluminum, anodized |
Seal | Polyurethane |
Ball rail table | Aluminum, anodized |
Guide rail | Steel, hardened |
Centering rings | Stainless steel |