We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R404050901
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Stroke | 60 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R404050901, catch up with FAMAGA, the world's chief provider of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and personalseparate attention to each buyer. We appreciate everyone, who cooperated with us - thus, our regular clients accept the most beneficial purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Venezuela, Bolivia, Mauritania, Saudi Arabia, Netherlands, Moldova, Samoa, Azerbaijan, Ireland, Czech Republic, Albania, Belgium, Gambia, Mexico, Slovenia, Costa Rica, Namibia, Kuwait, Ghana, China, Central African Republic, Libya, Romania, Sudan, Luxembourg, Kiribati, El Salvador, Peru, Rwanda, Benin, Dominica, Indonesia, Angola, East Timor, Tonga, Syria, Russia, South Korea, Belarus, Mauritius, Comoros, Brunei, Haiti, Antigua and Barbuda, Pakistan, Malta, Tajikistan, United Arab Emirates. A well-shaped logistics series and a partnership network assist us to deliver our products anywhere in the world as soon as possible without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To inquire or order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |