We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391203
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822391203, reach FAMAGA, the world's prime vendor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each user. We value everyone, who conspired with us - hence, our regular consumers accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Papua New Guinea, Albania, Afghanistan, Sri Lanka, Belize, El Salvador, Portugal, Czech Republic, Belarus, North Korea, Seychelles, Turkey, Egypt, Liberia, Antigua and Barbuda, Nepal, Singapore, Rwanda, Costa Rica, Uruguay, Pakistan, Oman, Guyana, Thailand, Japan, United States, Greece, Cyprus, Guatemala, Bulgaria, Poland, Uzbekistan, Dominica, Kiribati, South Sudan, Qatar, Indonesia, Latvia, The Gambia, Kuwait, Syria, Croatia, Tanzania, Burkina Faso, Ukraine, Panama, Luxembourg. A well-elaborated logistics series and a partnership network cheer us to dispatch our items anywhere in the world immediately without disreputing product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or make a request, contact us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |