We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822434201
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822434201, reach FAMAGA, the world's prime company of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each user. We praise everyone, who liased with us - thus, our regular purchasers accept the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Burma, Mali, Bulgaria, France, Georgia, Tunisia, Papua New Guinea, Afghanistan, Kyrgyzstan, Panama, Kazakhstan, Morocco, Israel, Nicaragua, Croatia, Central African Republic, Chad, Comoros, Bosnia and Herzegovina, East Timor, Moldova, Saudi Arabia, Ecuador, Suriname, Turkmenistan, Slovakia, United States, Norway, Hungary, Kuwait, Paraguay, South Sudan, Equatorial Guinea, Luxembourg, Jordan, Tanzania, Thailand, Senegal, Malta, Uruguay, Algeria, Denmark, Togo, Czech Republic, Cape Verde, Kenya, Zambia. A well-developed logistics link and a partnership network guide us to ship our units anywhere in the globe with no delay without damaging product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |