We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480158439
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480158439, call FAMAGA, the world's central provider of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each customer. We value everyone, who cooperated with us - therefore, our regular buyers obtain the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Brazil, Finland, Belarus, Netherlands, Lithuania, Greece, Monaco, Bolivia, Turkmenistan, Japan, Brunei, Ecuador, Latvia, Uruguay, Dominica, Libya, The Gambia, Cyprus, Haiti, Malta, The Bahamas, Luxembourg, Bangladesh, Costa Rica, Namibia, Cameroon, Swaziland, Nepal, Djibouti, Rwanda, Albania, South Korea, Panama, Andorra, Ireland, Eswatini, Vietnam, Mauritania, United Arab Emirates, North Korea, Cape Verde, Madagascar. A well-elaborated logistics chains and a partnership network allow us to send our products anywhere in the earth promptly without discrediting product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |