We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177143
Description
| Functional principle | double-acting |
| Cushioning | pneumatically,pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 80 mm |
| Piston rod thread | 3/4-16 UNF |
| Stroke | 101.6 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | 3/8 NPT |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R480177143, communicate with FAMAGA, the world's influential supplier of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and particular attention to each client. We cherish everyone, who joined with us - so, our regular purchasers pick up the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly form new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Chile, Botswana, Poland, The Bahamas, Namibia, Argentina, Nicaragua, China, Ecuador, Guyana, Kuwait, Jordan, Brunei, Bangladesh, Mauritius, Kazakhstan, Philippines, Vietnam, Romania, Andorra, Fiji, Albania, Algeria, Tajikistan, Brazil, Tonga, Morocco, Sweden, Estonia, Libya, Pakistan, Seychelles, Switzerland, Tanzania, Mauritania, Kenya, Togo, South Korea, Bolivia, Denmark, Serbia, Yemen. A advanced logistics connection and a partnership network allow us to conduct our products anywhere in the world immediately without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Compressed air connection | Internal thread |
| Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
