We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471319643
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7471319643, communicate with FAMAGA, the world's leading producer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are outlined in the quality of outputs and special attention to each purchaser. We cherish everyone, who cooperated with us - thus, our regular buyers accept the most helpful purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the earth Germany, United Kingdom, Libya, Mauritania, Latvia, El Salvador, Chile, Hungary, The Gambia, Albania, Colombia, Cameroon, Angola, Syria, Tonga, Suriname, Bosnia and Herzegovina, Oman, Thailand, United Arab Emirates, Cape Verde, Guyana, Ukraine, Georgia, United States, The Bahamas, Fiji, Rwanda, Kenya, Mauritius, Haiti, Samoa, Bulgaria, Egypt, Indonesia, Estonia, India, Seychelles, Nigeria, Serbia, Afghanistan, Luxembourg, Macedonia, Botswana, Sweden. A well-shaped logistics connection and a partnership network let us to conduct our products anywhere in the world on-time without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or order, get in touch with us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |