We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176463, communicate with FAMAGA, the world's key supplier of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each user. We cherish everyone, who worked with us - therefore, our regular clients procure the most beneficial purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Argentina, The Bahamas, Benin, Mexico, Jamaica, Paraguay, Cape Verde, Swaziland, Vietnam, Burkina Faso, Eswatini, Australia, Saudi Arabia, The Gambia, Bhutan, Suriname, Mauritius, Belarus, Sweden, Moldova, Panama, Samoa, Mali, North Korea, Djibouti, Zimbabwe, Angola, Latvia, Kuwait, Estonia, Turkey, Mozambique, Syria, Mauritania, Israel, Tajikistan, Bulgaria, Morocco, Ukraine, Costa Rica, Equatorial Guinea, Switzerland, Ghana. A well-elaborated logistics system and a partnership network let us to send our elements anywhere in the globe on-time without undermining product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |