We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342507
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822342507, communicate with FAMAGA, the world's primary provider of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each user. We respect everyone, who joined with us - hence, our regular buyers get the most favorable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Moldova, Guyana, United States, Afghanistan, Philippines, Austria, Estonia, Italy, Kuwait, Switzerland, South Korea, Tanzania, New Zealand, Chad, Georgia, Grenada, Sweden, Costa Rica, Burkina Faso, Dominica, Brazil, United Arab Emirates, Pakistan, Namibia, Tonga, China, Tajikistan, The Gambia, Madagascar, Nepal, Luxembourg, Thailand, Seychelles, East Timor, Belarus, Rwanda, Russia, Senegal, Suriname, Macedonia, Haiti, Algeria, Bolivia, Montenegro. A well-elaborated logistics connection and a partnership network cheer us to send our items anywhere in the world quickly without undermining product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |