We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822498303
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822498303, communicate with FAMAGA, the world's top company of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each buyer. We understand everyone, who cooperated with us - therefore, our regular customers receive the most convenient purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Czech Republic, Jamaica, Mozambique, Morocco, Bolivia, Australia, Dominican Republic, Benin, Oman, Costa Rica, Peru, Indonesia, Iceland, Sierra Leone, Vietnam, Azerbaijan, Burma, Netherlands, Madagascar, Monaco, Grenada, Libya, Luxembourg, Burkina Faso, Nicaragua, Fiji, Rwanda, Kiribati, Pakistan, Jordan, United Arab Emirates, Sweden, Haiti, United States, Equatorial Guinea, Swaziland, Burundi, Latvia, Bulgaria, Qatar, Bangladesh, Tajikistan, Lithuania, Malaysia, Albania, Central African Republic. A well-elaborated logistics system and a partnership network allow us to deliver our items anywhere in the world immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, get in touch with us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |