We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472020079
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472020079, catch up with FAMAGA, the world's primary company of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are portrayed in the quality of outcomes and private attention to each orderer. We praise everyone, who conspired with us - therefore, our regular consumers pick up the most acceptable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such consumers, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Paraguay, Croatia, Comoros, Sweden, Djibouti, Uruguay, Bahamas, Ireland, Portugal, Romania, Zimbabwe, Finland, Yemen, Laos, Papua New Guinea, Bolivia, Belize, Bhutan, Monaco, Brunei, Guyana, Saudi Arabia, Austria, Peru, Poland, South Sudan, Russia, Czech Republic, Armenia, Benin, Tunisia, Switzerland, Syria, Tajikistan, Guatemala, Iraq, Nepal, Antigua and Barbuda, Indonesia, Turkey, Panama, Equatorial Guinea, Angola, Mali, Cyprus, Samoa, Bangladesh. A advanced logistics series and a partnership network assist us to dispatch our units anywhere in the globe with no delay without undermining product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this number is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |