We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472021550
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472021550, call FAMAGA, the world's primary supplier of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of outputs and private attention to each user. We esteem everyone, who collaborated with us - thus, our regular clients procure the most acceptable purchase forms and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Georgia, Libya, Iran, Albania, South Africa, Monaco, Grenada, South Sudan, Angola, Morocco, Uzbekistan, Mauritius, Malaysia, Tajikistan, Kuwait, Syria, Burkina Faso, Oman, Zimbabwe, United States, Kazakhstan, Pakistan, Suriname, Togo, Fiji, Ghana, East Timor, Hungary, Lithuania, Belarus, Tonga, Latvia, Poland, Equatorial Guinea, Seychelles, Indonesia, United Arab Emirates, Belize, Cyprus, Mozambique, Finland, Namibia, Yemen, Mongolia. A well-shaped logistics chains and a partnership network let us to conduct our items anywhere in the earth immediately without disreputing product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |