Aventics (brand of Emerson) 0822343002
  Aventics (brand of Emerson) 0822343002

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822343002 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822343002

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 63 mm
Piston rod thread M16x1,5
Standardization ISO 15552
Stroke 50 mm
Sealing material Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 3/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822343002

If you are looking for Aventics (brand of Emerson) 0822343002, contact FAMAGA, the world's top producer of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of products and particular attention to each consumer. We value everyone, who cooperated with us - therefore, our regular purchasers receive the most attractive purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the world . A well-built logistics network and a partnership network allow us to ship our units anywhere in the planet as soon as possible without disreputing product quality.

A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.

All products from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.

To request or place an order, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0822343002

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.