We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301803
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
inspection glass | with window |
Housing | Die-cast aluminum |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 18000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821301803, call FAMAGA, the world's major retailer of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of items and individual attention to each customer. We value everyone, who liased with us - therefore, our regular clients receive the most desirable purchase terms and discounts on the factory-made equipment market. Now, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the earth Germany, United Kingdom, Comoros, Tanzania, New Zealand, Palestine, Bahamas, Jordan, Laos, Mongolia, Mozambique, Swaziland, Rwanda, Cyprus, Kazakhstan, Sierra Leone, Uruguay, South Korea, Mali, Eritrea, Antigua and Barbuda, Oman, Serbia, Uzbekistan, Burundi, Guatemala, Russia, Tonga, Azerbaijan, Iran, Ecuador, Turkmenistan, Paraguay, Thailand, Nigeria, Madagascar, Brazil, Austria, Norway, Croatia, Iceland, Uganda, Bulgaria, Dominica, Armenia, Costa Rica. A well-shaped logistics link and a partnership network assist us to conduct our products anywhere in the planet with no delay without damaging product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, contact us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 450 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |