We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009218
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412009218, connect FAMAGA, the world's primary retailer of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each user. We esteem everyone, who liased with us - so, our regular consumers accept the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Sri Lanka, Mozambique, Benin, Kuwait, Swaziland, Cuba, Fiji, Netherlands, Liberia, Russia, Myanmar, Israel, Malawi, Qatar, Honduras, Sweden, Kiribati, United States, Kenya, Turkey, Serbia, Botswana, Equatorial Guinea, Greece, Belarus, Eswatini, North Korea, Finland, Tonga, Peru, Burundi, Cyprus, Brunei, Croatia, Mauritius, Cameroon, Seychelles, Slovakia, Yemen, Nigeria, United Arab Emirates, Luxembourg, Indonesia, Samoa. A well-shaped logistics series and a partnership network assist us to dispatch our goods anywhere in the globe quickly without undermining product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate |
Protective guard | Polyamide |
Filter insert | Polyethylene |