We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822397009
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822397009, call FAMAGA, the world's chief supplier of manufacturing equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of items and personalseparate attention to each client. We admire everyone, who cooperated with us - thus, our regular buyers receive the most helpful purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such buyers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Cuba, Mexico, Guatemala, Suriname, Morocco, Slovenia, El Salvador, The Bahamas, Turkmenistan, The Gambia, Lebanon, Czech Republic, Liberia, United Arab Emirates, Singapore, East Timor, Nigeria, Egypt, Kiribati, Australia, Finland, Ireland, Sierra Leone, Argentina, Poland, Kenya, Denmark, Botswana, Eswatini, Samoa, Tunisia, Vietnam, Kuwait, Cyprus, Zimbabwe, Tonga, Afghanistan, Israel, Nepal, Laos, Bolivia, Albania, Swaziland, Benin. A well-developed logistics network and a partnership network cheer us to deliver our goods anywhere in the earth on-time without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are happy that users choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |