We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176366, contact FAMAGA, the world's key company of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of goods and personalseparate attention to each user. We appreciate everyone, who worked with us - so, our regular clients procure the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Bhutan, Thailand, Czech Republic, Iraq, Algeria, Saudi Arabia, Tonga, Jordan, Georgia, Denmark, Japan, Brunei, El Salvador, Armenia, Guinea, Botswana, Libya, Finland, Costa Rica, Niger, Kyrgyzstan, Turkmenistan, South Korea, Montenegro, Serbia, China, Hungary, Cape Verde, Slovakia, United Arab Emirates, Nigeria, Sudan, Kiribati, Tunisia, Togo, Iran, Latvia, Equatorial Guinea, Ireland, Mongolia, Brazil, Bangladesh, Israel. A well-elaborated logistics system and a partnership network guide us to send our units anywhere in the world immediately without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |