We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5802500000
Description
Standardization | ISO 5599-1 |
Accessory type | type G |
Number of valve positions | 1 |
Frame size | ISO 2 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 3/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5802500000, catch up with FAMAGA, the world's major distributor of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and personalseparate attention to each customer. We appreciate everyone, who collaborated with us - so, our regular consumers accept the most beneficial purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Vietnam, Colombia, Cambodia, Azerbaijan, Egypt, Pakistan, Fiji, Namibia, Belarus, Kiribati, Eritrea, Lithuania, Latvia, The Gambia, New Zealand, Singapore, Thailand, Qatar, East Timor, Burundi, Romania, Sierra Leone, South Sudan, Bulgaria, Austria, Haiti, Kazakhstan, Mauritius, Israel, Madagascar, Macedonia, Togo, Mexico, Benin, Libya, United Arab Emirates, Philippines, Uganda, Brunei, Syria, Luxembourg, Zimbabwe. A well-shaped logistics chains and a partnership network cheer us to dispatch our units anywhere in the planet immediately without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or order, contact us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | -1 ... 16 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Direction of pneumatic port (2,4) | Both directions possible |
Direction of pneumatic port (14) | Down |
Exhaust (3,5) | uncollected exhaust |
Exhaust type | Ports separated |
Weight | 0,36 kg |
An example configuration is illustrated. The delivered product may thus deviate from the illustration. |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |