We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226610350
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 35 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226610350, reach FAMAGA, the world's chief vendor of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of outputs and personalseparate attention to each customer. We cherish everyone, who collaborated with us - therefore, our regular consumers accept the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Lithuania, Liechtenstein, Romania, Panama, Montenegro, Czech Republic, Denmark, Comoros, Senegal, United States, Liberia, Poland, Bangladesh, Ukraine, Bhutan, Burundi, Tajikistan, Iceland, Uzbekistan, Jordan, Eswatini, Costa Rica, Dominica, Cameroon, Syria, Antigua and Barbuda, Swaziland, Sudan, Benin, Namibia, Central African Republic, Paraguay, Suriname, Zambia, India, Malta, Algeria, Malaysia, Slovakia, Switzerland. A well-elaborated logistics chains and a partnership network guide us to dispatch our goods anywhere in the earth quickly without damaging product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |