We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001403
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001403, call FAMAGA, the world's prime provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each user. We cherish everyone, who worked with us - therefore, our regular consumers obtain the most desirable purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such customers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Kazakhstan, Ukraine, Guinea, Burma, Benin, Portugal, Sudan, Namibia, Costa Rica, Palestine, Yemen, Eswatini, Syria, Uzbekistan, Bhutan, Slovakia, Armenia, Tunisia, Czech Republic, Norway, Nigeria, Argentina, Antigua and Barbuda, Cameroon, Laos, Malta, Iceland, Belize, Andorra, Brunei, Bulgaria, Malaysia, Algeria, North Korea, Austria, Israel, Zambia, Macedonia, Samoa, Australia, Guatemala. A advanced logistics bond and a partnership network allow us to dispatch our goods anywhere in the globe with no delay without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or order, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |