We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010612
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M5 |
Stroke | 15 mm |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822010612, get in touch with FAMAGA, the world's chief vendor of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and special attention to each purchaser. We value everyone, who engaged with us - thus, our regular purchasers pick up the most attractive purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Suriname, Finland, Guinea-Bissau, Nicaragua, Guyana, Kyrgyzstan, Singapore, Palestine, Poland, Japan, Sudan, Luxembourg, Honduras, Fiji, Afghanistan, Benin, Switzerland, Swaziland, Peru, United States, Mozambique, Vietnam, Bolivia, Egypt, Togo, Ireland, Cyprus, Cape Verde, Bangladesh, Syria, Kiribati, Jamaica, Djibouti, Morocco, Indonesia, Mauritania, Samoa, Hungary, Zimbabwe, Paraguay. A well-built logistics link and a partnership network guide us to send our units anywhere in the planet on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To request or book, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |