We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001432 (CCI-SA-016-0025-00212241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001432
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001432 (CCI-SA-016-0025-00212241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001432, contact FAMAGA, the world's main distributor of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and personalseparate attention to each consumer. We value everyone, who conspired with us - hence, our regular clients obtain the most flexible purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Spain, Sudan, Argentina, France, Burundi, Belize, Lesotho, Afghanistan, Austria, Liechtenstein, Tajikistan, Lithuania, Malawi, Jordan, Senegal, Oman, Slovakia, India, Uruguay, Mali, Japan, Liberia, Chile, Kazakhstan, Kiribati, Armenia, Rwanda, Nigeria, Hungary, Kenya, Laos, Zimbabwe, Iraq, Serbia, Andorra, Iceland, Bangladesh, Iran, Antigua and Barbuda, Kyrgyzstan, Moldova, Seychelles, Cameroon, Indonesia. A well-developed logistics bond and a partnership network cheer us to send our elements anywhere in the world on-time without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |