Aventics (brand of Emerson) 0822031207
  Aventics (brand of Emerson) 0822031207

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822031207 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822031207

Description

Functional principle double-acting
Cushioning elastic
Piston diameter 12 mm
Piston rod thread M6
Standardization ISO 6432
Stroke 160 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection M5
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822031207

If you are looking for Aventics (brand of Emerson) 0822031207, catch up with FAMAGA, the world's the best supplier of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of outcomes and private attention to each client. We value everyone, who collaborated with us - therefore, our regular purchasers pick up the most favorable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world . A well-built logistics system and a partnership network cheer us to dispatch our goods anywhere in the planet as soon as possible without disreputing product quality.

A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the field of factory-made equipment.

All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are happy that customers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.

To request or order, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features 0822031207

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane