We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412010200
Description
double | |
Functional principle | Single-acting, retracted without pressure |
Stroke | 223 mm |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412010200, make contact with FAMAGA, the world's top producer of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of goods and personalseparate attention to each consumer. We esteem everyone, who conspired with us - thus, our regular consumers obtain the most beneficial purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such consumers, and we constantly sign new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Dominican Republic, Venezuela, Malawi, Netherlands, South Korea, Nicaragua, Colombia, Kiribati, Samoa, Denmark, Oman, Haiti, Brunei, Paraguay, Singapore, Georgia, Eritrea, Philippines, Greece, Djibouti, Kuwait, Morocco, Vietnam, Switzerland, Estonia, Finland, Mauritania, Malaysia, Cyprus, Kyrgyzstan, Botswana, Mexico, Togo, Tanzania, United States, Cameroon, Zimbabwe, United Arab Emirates, Seychelles, Peru. A well-elaborated logistics chains and a partnership network let us to deliver our units anywhere in the planet on-time without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Bellow actuator with cover |
Functional principle | Single-acting, retracted without pressure |
Working pressure min./max. | 0 ... 8 bar |
Ambient temperature min./max. | -40 ... 70 °C |
Medium | Compressed air |
Permissible angle of tilt max. | 20 ° |
Pressure for determining forces | 6 bar |
Weight | See table |
Compliance with the minimum height H min. as well as the maximum height H max. must be ensured with end stops. Use at operating height ≥ Hmax: only permitted upon approval by AVENTICS Further information on vibration isolation can be found in the “Technical information” document (available in the MediaCentre). | |
Reduced service life at a temperature greater than | 50 °C |
Material |
---|
Bellow | caoutchouc/butadiene caoutchouc |
Front cover | Steel, galvanized |
End cover | Steel, galvanized |