Aventics (brand of Emerson) 0822344904
  Aventics (brand of Emerson) 0822344904

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822344904 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822344904

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 80 mm
Piston rod thread M20x1,5
Standardization ISO 15552
Stroke 125 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 3/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822344904

If you are questing Aventics (brand of Emerson) 0822344904, make contact with FAMAGA, the world's principle provider of manufacturing equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and particular attention to each orderer. We praise everyone, who collaborated with us - so, our regular buyers pick up the most flexible purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the earth . A well-shaped logistics chains and a partnership network cheer us to send our items anywhere in the globe as soon as possible without damaging product quality.

A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of machine made streamlined equipment.

All items from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.

To get some advice or book, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822344904

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed!
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Trunnion mounting Nodular graphite iron, galvanized
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.