We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637853
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480637853, catch up with FAMAGA, the world's dominant retailer of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of goods and private attention to each customer. We esteem everyone, who worked with us - thus, our regular consumers receive the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Dominica, Brazil, Oman, Bulgaria, Burma, Czech Republic, Ukraine, Kuwait, Slovakia, Mongolia, Nigeria, Chad, Equatorial Guinea, Eritrea, South Korea, Macedonia, Tunisia, Gambia, Yemen, Azerbaijan, Syria, Denmark, Belize, Zambia, Norway, Armenia, Chile, Tanzania, India, Nepal, Ghana, Comoros, Bosnia and Herzegovina, Mexico, Libya, Bangladesh, Namibia, Togo. A well-shaped logistics chains and a partnership network allow us to ship our products anywhere in the earth as soon as possible without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To ask a question or book, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |