We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013721
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412013721, catch up with FAMAGA, the world's foremost distributor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of products and individual attention to each customer. We esteem everyone, who engaged with us - hence, our regular customers bring in the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Canada, Dominica, Norway, United States, Liberia, Namibia, Vietnam, Dominican Republic, Guatemala, Serbia, Oman, Denmark, North Korea, Haiti, Croatia, Japan, Egypt, Latvia, Samoa, Swaziland, Ukraine, Albania, Burundi, Cape Verde, Tunisia, Botswana, India, Madagascar, Rwanda, Guyana, Uganda, United Arab Emirates, Russia, China, South Sudan, Kazakhstan, Seychelles, Zimbabwe, Mexico, Montenegro, Malaysia, New Zealand, Sweden, Tanzania, Yemen, Kyrgyzstan. A well-shaped logistics chains and a partnership network guide us to deliver our elements anywhere in the globe quickly without compromising product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To inquire or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |