We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148059
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480148059, call FAMAGA, the world's chief provider of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of spare parts and special attention to each consumer. We esteem everyone, who collaborated with us - therefore, our regular clients get the most convenient purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Oman, Syria, Kenya, Ireland, Gambia, Argentina, Switzerland, Cuba, Egypt, Peru, Singapore, Eswatini, Tonga, Zimbabwe, Malaysia, Monaco, Mauritania, Madagascar, Pakistan, Kuwait, Macedonia, Finland, Jordan, Estonia, Cameroon, Benin, Armenia, Indonesia, Kyrgyzstan, Nicaragua, Bangladesh, Vietnam, El Salvador, Cape Verde, Russia, Ghana, Comoros, Tajikistan, Afghanistan, Bulgaria, Qatar, Uruguay, Dominica, Norway, Swaziland, Czech Republic. A well-elaborated logistics bond and a partnership network assist us to send our units anywhere in the planet as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |