Aventics (brand of Emerson) 0822345610
  Aventics (brand of Emerson) 0822345610

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822345610 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822345610

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 100 mm
Piston rod thread M20x1,5
Standardization ISO 15552
Stroke 200 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/2
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822345610

If you are looking for Aventics (brand of Emerson) 0822345610, communicate with FAMAGA, the world's key provider of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each consumer. We admire everyone, who cooperated with us - so, our regular consumers bring in the most desirable purchase forms and discounts on the industrial equipment market. At present, there are more than 3500 such purchasers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world . A well-developed logistics system and a partnership network help us to dispatch our goods anywhere in the globe immediately without discrediting product quality.

A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of industrial equipment.

All items from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.

To request or make a request, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822345610

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.