We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344507
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822344507, reach FAMAGA, the world's primary vendor of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each user. We appreciate everyone, who joined with us - hence, our regular consumers get the most convenient purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Finland, Georgia, Australia, Brazil, Cuba, Nepal, Norway, China, Oman, Haiti, Turkey, India, Montenegro, Estonia, Madagascar, North Korea, Romania, Uruguay, Tajikistan, Czech Republic, East Timor, Austria, Guyana, Bangladesh, Croatia, Mauritania, Kuwait, Poland, Syria, South Korea, Switzerland, Hungary, Luxembourg, Indonesia, Benin, Ireland, Iran, Samoa, Djibouti. A advanced logistics connection and a partnership network assist us to dispatch our units anywhere in the world with no delay without compromising product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or make a request, phone us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |