We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471314123
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 300 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7471314123, call FAMAGA, the world's major distributor of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are represented in the quality of outcomes and special attention to each purchaser. We value everyone, who liased with us - hence, our regular buyers accept the most attractive purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Chile, Norway, Zimbabwe, Comoros, Palestine, Iraq, Peru, Mali, Papua New Guinea, Liechtenstein, Oman, Mauritius, Botswana, Dominica, Argentina, Central African Republic, Djibouti, Malawi, Swaziland, Uzbekistan, Morocco, Cameroon, Turkmenistan, Macedonia, Kazakhstan, Algeria, Senegal, Ecuador, Bulgaria, Laos, Madagascar, Moldova, Uganda, Kyrgyzstan, Libya, Haiti, Hungary, Greece. A well-shaped logistics connection and a partnership network let us to conduct our products anywhere in the world immediately without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as keep on top of it.
To consult or make a request, phone us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |