We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822430303
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822430303, communicate with FAMAGA, the world's primary distributor of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each user. We appreciate everyone, who joined with us - thus, our regular consumers accept the most helpful purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Swaziland, Botswana, Canada, Uganda, Fiji, Rwanda, Dominican Republic, Mexico, Liechtenstein, United Arab Emirates, Jordan, Austria, Romania, Eritrea, Latvia, Chad, Brazil, Netherlands, Cyprus, Guyana, Estonia, Panama, Ireland, Mauritius, Croatia, Tajikistan, Zimbabwe, Jamaica, Poland, Algeria, Madagascar, Malaysia, Suriname, Dominica, Switzerland, Kuwait, Comoros. A well-elaborated logistics bond and a partnership network assist us to dispatch our elements anywhere in the world promptly without discrediting product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are glad that users choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |