We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822430302
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822430302, connect FAMAGA, the world's principle company of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and special attention to each orderer. We praise everyone, who liased with us - therefore, our regular buyers bring in the most beneficial purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uganda, Chile, Liberia, Tajikistan, Tunisia, Latvia, Belgium, Burma, Turkey, Georgia, India, Qatar, Swaziland, Liechtenstein, Iran, South Sudan, Chad, Poland, Azerbaijan, Macedonia, Greece, Kiribati, Rwanda, Turkmenistan, Norway, Angola, Eswatini, Ghana, Jordan, Australia, Kenya, Algeria, Sierra Leone, Nigeria, Bangladesh, Senegal. A well-developed logistics series and a partnership network allow us to send our products anywhere in the globe as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |