We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822430202
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822430202, make contact with FAMAGA, the world's foremost supplier of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of goods and individual attention to each client. We appreciate everyone, who engaged with us - thus, our regular customers pick up the most desirable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, East Timor, Burkina Faso, The Bahamas, Guinea-Bissau, Philippines, Montenegro, Honduras, Oman, Kuwait, Cameroon, Estonia, Denmark, Iran, South Sudan, Morocco, Belize, Monaco, Guinea, Czech Republic, Russia, China, Botswana, Cape Verde, Mozambique, Fiji, Bolivia, Antigua and Barbuda, Vietnam, Indonesia, Georgia, Suriname, Togo, Zimbabwe, Angola, Serbia, Mauritius, Swaziland. A advanced logistics link and a partnership network allow us to conduct our products anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or book, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |