We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019818
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 20 mm |
| Piston rod thread | M5 |
| Standardization | ISO 15524 |
| Stroke | 15 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber |
| Compressed air connection | M5 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) R412019818, contact FAMAGA, the world's top provider of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are symbolized in the quality of merchandises and personalseparate attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular consumers get the most flexible purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Mauritius, South Korea, Guyana, Sri Lanka, Croatia, Bulgaria, Canada, Singapore, Nepal, Malta, Luxembourg, Eswatini, Australia, Russia, Suriname, Burundi, The Bahamas, Bhutan, Libya, El Salvador, Cape Verde, Benin, Estonia, Seychelles, South Sudan, Togo, Tunisia, Switzerland, Brunei, Jamaica, Sweden, Djibouti, Tajikistan, The Gambia, Peru, Costa Rica, Kuwait. A advanced logistics series and a partnership network let us to send our units anywhere in the planet promptly without disreputing product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Use our Internet configurator to order variants with an external thread. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
