We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503070
Description
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1825503070, communicate with FAMAGA, the world's chief supplier of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and special attention to each client. We esteem everyone, who conspired with us - therefore, our regular clients obtain the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Iran, Guatemala, Liberia, Brazil, Lebanon, Djibouti, Portugal, Croatia, Eswatini, Japan, Mauritania, Vietnam, Kenya, Latvia, Senegal, Finland, Syria, Dominica, Nepal, Slovakia, United Arab Emirates, Egypt, Serbia, Afghanistan, Georgia, Ireland, Greece, Sweden, Montenegro, El Salvador, Australia, South Sudan, Kyrgyzstan, Mozambique, Belize, Swaziland, Bangladesh, Peru, Cyprus, Togo, Czech Republic, Cape Verde, Switzerland. A well-elaborated logistics connection and a partnership network help us to send our goods anywhere in the planet promptly without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that users choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The delivered product varies from that in the illustration. See the drawing for an exact description. |
Material |
---|
Base plate | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |