We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062107
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822062107, communicate with FAMAGA, the world's chief company of machine made equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each orderer. We praise everyone, who engaged with us - thus, our regular buyers accept the most attractive purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Iraq, Mexico, Antigua and Barbuda, Paraguay, Uzbekistan, Pakistan, Grenada, Djibouti, Iceland, The Gambia, Latvia, Peru, Zambia, Sweden, Sudan, Belarus, Burma, Singapore, Zimbabwe, Kazakhstan, Serbia, Afghanistan, Guatemala, Suriname, Switzerland, Comoros, Israel, Nicaragua, Uganda, Panama, Sierra Leone, Qatar, Turkey, Swaziland, Denmark, Costa Rica, Georgia, Egypt, Estonia, Samoa, Thailand, Benin, Albania. A well-developed logistics link and a partnership network assist us to conduct our items anywhere in the globe on-time without compromising product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are glad that users choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, phone us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |