We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627657
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480627657, reach FAMAGA, the world's primary retailer of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of products and particular attention to each client. We admire everyone, who conspired with us - thus, our regular purchasers get the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Venezuela, Madagascar, Malta, Ghana, Azerbaijan, United States, Chad, Estonia, Zambia, Philippines, Brunei, Bahamas, Samoa, Mali, East Timor, Iraq, Poland, Grenada, Netherlands, Bhutan, Bulgaria, Finland, Indonesia, Belarus, Syria, Djibouti, Latvia, Czech Republic, Russia, Equatorial Guinea, Switzerland, South Sudan, United Arab Emirates, Australia, Morocco, Norway, Tajikistan, Croatia, Burkina Faso, Peru, Benin, New Zealand, Guatemala, Pakistan. A advanced logistics connection and a partnership network guide us to conduct our elements anywhere in the planet promptly without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |