We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009034
Description
Parts | Pre-filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 0.3 µm |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2200 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412009034, make contact with FAMAGA, the world's main producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each purchaser. We admire everyone, who worked with us - hence, our regular consumers obtain the most flexible purchase terms and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Czech Republic, Ukraine, Palestine, India, Latvia, Bosnia and Herzegovina, East Timor, Mali, Bangladesh, Lebanon, Eritrea, Turkey, Cameroon, Tonga, Australia, Japan, Tanzania, Kenya, Costa Rica, Belize, Malta, Liechtenstein, Greece, Mongolia, New Zealand, Macedonia, Switzerland, Kazakhstan, South Korea, Iraq, Brunei, Sierra Leone, Poland, Libya, Georgia, Central African Republic, Burundi, Niger, Iceland, Argentina, Dominica, Israel, Slovakia. A well-built logistics bond and a partnership network help us to dispatch our units anywhere in the globe on-time without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Pre-filter, Can be assembled into blocks |
Parts | Pre-filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
filter porosity | 0,3 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering | 5 µm |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 2 : - : 3 |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Impregnated paper |