We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147995
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480147995, catch up with FAMAGA, the world's dominant producer of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each buyer. We esteem everyone, who worked with us - so, our regular purchasers accept the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Uruguay, Georgia, Sierra Leone, Panama, Finland, Djibouti, Cape Verde, Botswana, Algeria, South Sudan, Nicaragua, Burundi, Guinea, Serbia, Moldova, Sweden, Mauritania, Canada, Bhutan, South Korea, Bangladesh, Switzerland, Tajikistan, Liberia, Estonia, Kenya, Bulgaria, Vietnam, Bolivia, Nepal, China, Ukraine, Afghanistan, Slovakia, Niger, Mozambique, Malta, Zimbabwe, United Arab Emirates, Brunei, Seychelles, Morocco, Luxembourg, Croatia, Tonga. A advanced logistics series and a partnership network let us to conduct our goods anywhere in the planet quickly without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |