We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013658
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412013658, contact FAMAGA, the world's top producer of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and particular attention to each user. We appreciate everyone, who collaborated with us - thus, our regular clients accept the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, South Korea, Senegal, Guinea-Bissau, Zimbabwe, Cyprus, Bahamas, Albania, Netherlands, El Salvador, Israel, Japan, The Bahamas, Chile, Niger, Eritrea, Fiji, Morocco, Jordan, South Sudan, Seychelles, Nepal, Guatemala, Dominica, Malaysia, Tonga, New Zealand, Egypt, Kenya, Sweden, Sudan, Finland, Serbia, Mauritania, Brunei, Luxembourg, Czech Republic, Cape Verde, Poland, Switzerland, Croatia, Ukraine. A well-built logistics system and a partnership network allow us to conduct our goods anywhere in the planet on-time without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To request or order, call us by phone or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |