We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264800
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.03 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5610264800, make contact with FAMAGA, the world's prime company of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are portrayed in the quality of goods and individual attention to each orderer. We appreciate everyone, who collaborated with us - therefore, our regular customers get the most flexible purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Uruguay, Côte d\'Ivoire, Spain, Malawi, Greece, Libya, Tonga, Kiribati, Suriname, Palestine, Andorra, Eswatini, Nepal, Burma, Swaziland, Kenya, Cape Verde, Ukraine, Bangladesh, Gambia, Turkey, Netherlands, Zambia, Finland, Liberia, Thailand, Ireland, Antigua and Barbuda, North Korea, Paraguay, Kyrgyzstan, Azerbaijan, Iran, Ecuador, Rwanda, Syria, Hungary, Central African Republic, Moldova, Laos, Guatemala. A well-elaborated logistics link and a partnership network allow us to conduct our items anywhere in the world immediately without discrediting product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To consult or book, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |