We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822497204
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M16x1,5 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822497204, connect FAMAGA, the world's influential provider of machine made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each purchaser. We cherish everyone, who joined with us - therefore, our regular customers procure the most favorable purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Serbia, Bolivia, Oman, Benin, Yemen, Samoa, Papua New Guinea, France, Rwanda, Burundi, Ireland, China, Syria, Singapore, East Timor, Estonia, Israel, Pakistan, Saudi Arabia, Uzbekistan, Austria, Morocco, Belarus, Cape Verde, Madagascar, Seychelles, Georgia, North Korea, Swaziland, Sudan, Latvia, Brazil, Nepal, Switzerland, Tunisia, Tajikistan, Russia, Albania, Croatia, Denmark, Egypt, Tanzania, Qatar, Luxembourg. A well-developed logistics connection and a partnership network guide us to deliver our units anywhere in the world on-time without compromising product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or place an order, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |