We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342612
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822342612, get in touch with FAMAGA, the world's top company of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of spare parts and particular attention to each consumer. We value everyone, who engaged with us - thus, our regular clients procure the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Albania, Djibouti, Romania, Ireland, Kuwait, Botswana, Colombia, Palestine, Czech Republic, Antigua and Barbuda, Egypt, Estonia, Mauritius, Eritrea, Costa Rica, Serbia, Kyrgyzstan, Benin, Liberia, Liechtenstein, Ghana, Sweden, South Korea, Luxembourg, Brunei, Mexico, Philippines, Andorra, Nepal, Algeria, Indonesia, Slovakia, Suriname, Togo, Malta, Belize, Angola, Samoa, Qatar, Tanzania, Belarus, Kenya, Panama, Peru. A well-shaped logistics bond and a partnership network cheer us to send our goods anywhere in the world with no delay without disreputing product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or book, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |