We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394609
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822394609, communicate with FAMAGA, the world's prime producer of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each user. We respect everyone, who cooperated with us - so, our regular customers receive the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4500 such buyers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Zambia, Kiribati, Malawi, Brazil, Iran, Namibia, Lebanon, Slovenia, Seychelles, Georgia, Slovakia, Nigeria, Equatorial Guinea, Saudi Arabia, Algeria, Mongolia, Mozambique, Argentina, Monaco, Fiji, Madagascar, Central African Republic, Rwanda, Iceland, Senegal, Austria, Malta, Cyprus, Australia, Haiti, Bulgaria, Mauritania, Uruguay, Macedonia, Croatia, El Salvador, Jordan, Greece, Andorra, Vietnam, Hungary, Bolivia, Eswatini, Laos. A well-built logistics system and a partnership network cheer us to deliver our items anywhere in the globe immediately without undermining product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |