We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340503
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822340503, reach FAMAGA, the world's main producer of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and individual attention to each consumer. We admire everyone, who cooperated with us - thus, our regular consumers get the most beneficial purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Botswana, Luxembourg, Belarus, Sweden, Guatemala, Singapore, Guinea, Kazakhstan, North Korea, South Korea, Albania, Tajikistan, The Bahamas, Palestine, Samoa, Austria, Egypt, Liechtenstein, Burundi, Turkey, Mauritius, Comoros, Finland, Nepal, Indonesia, Cyprus, Norway, Dominica, Monaco, Kuwait, Rwanda, East Timor, Estonia, Denmark, Tunisia, Philippines, United States, Vietnam, Macedonia, Mozambique, India, Bolivia, Pakistan. A well-elaborated logistics network and a partnership network assist us to conduct our items anywhere in the earth promptly without discrediting product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, phone us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |