We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301804
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 18000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821301804, make contact with FAMAGA, the world's key producer of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of goods and special attention to each consumer. We esteem everyone, who worked with us - therefore, our regular buyers bring in the most flexible purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the earth Germany, United Kingdom, Czech Republic, Niger, Bulgaria, Italy, Lesotho, Kazakhstan, Belize, South Sudan, Dominica, Cape Verde, Turkey, Hungary, Japan, Malta, Rwanda, Sweden, Ghana, Qatar, Vietnam, Haiti, The Bahamas, Gambia, New Zealand, Israel, Bosnia and Herzegovina, Sudan, Iceland, Finland, Turkmenistan, Cameroon, Sierra Leone, Swaziland, Jordan, The Gambia, Brazil, Serbia, Togo, Kiribati, Paraguay, Zambia, Botswana, Iran, United States, Greece, Kyrgyzstan. A well-developed logistics bond and a partnership network allow us to send our elements anywhere in the planet quickly without compromising product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 450 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |