We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637910
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 100 mm |
| Piston rod thread | M20 |
| Standardization | ISO 15524 |
| Stroke | 50 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | G 3/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) R480637910, communicate with FAMAGA, the world's primary producer of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each purchaser. We cherish everyone, who worked with us - so, our regular customers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Brazil, Lithuania, Serbia, Mongolia, El Salvador, Costa Rica, Uruguay, Uganda, Tajikistan, Ghana, Croatia, Grenada, Algeria, Liberia, Djibouti, Tunisia, Switzerland, Iran, Dominica, Mali, Rwanda, Pakistan, Cameroon, Sierra Leone, The Gambia, Paraguay, Afghanistan, North Korea, Ecuador, Haiti, Bosnia and Herzegovina, Finland, Andorra, Kenya, Kyrgyzstan, Armenia, Kiribati, Ireland. A well-built logistics connection and a partnership network assist us to send our elements anywhere in the world promptly without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To request or order, phone us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
